Blood Pressure Regulation (BP Reg) Experiment: Flight Engineer (FE)-5 Parmitano set up hardware to support the leg cuff and rebreathing protocol for the Canadian Space Agency BP Reg experiment. He then performed the experiment protocol on himself. BP Reg tests the efficacy of an in-flight manipulation of arterial blood pressure as an indicator of post-flight …
Cygnus Onboard Training Sessions: Flight Engineer (FE)-5 Parmitano and FE-6 Nyberg have taken part in onboard training sessions to gain proficiency on the Cygnus departure profile, procedures, and the crew interfaces for monitoring and commanding Cygnus. Unberth from ISS is scheduled for 05:00am CDT Tuesday, 22 October. Spinal Ultrasound Scan Operations: Nyberg performed her third and …
Ocular Health (OH) Optical Coherence Tomography (OCT): Flight Engineer (FE)-6 Nyberg and FE-3 Hopkins set up associated Extravehicular Activity (EVA) Infrared (IR) hardware and took turns as Crew Medical Officer (CMO) and subject, performing the eye examination portion of OCT Functional Checkout with the ground experts providing remote guidance. The OCT testing will be used …
Investigating the Structure of Paramagnetic Aggregates from Colloidal Emulsions (InSPACE)-3 Experiment: Flight Engineer (FE)-5 Parmitano conducted the 2nd of the new series of 12 InSPACE-3 runs. This new series uses the same test parameter settings as previous runs but with an increase in the duration from 2 hours to between 4.5 and 6 hours. This …
Extravehicular Activity (EVA) Mobility Unit (EMU) Loop Scrub: Flight Engineer (FE)-3 Hopkins conducted periodic maintenance of the Airlock (A/L) cooling loop system. This included a partial feedwater tank dump/fill on EMU 3005 and a water recharge of EMU 3010 to make up for water used during Water Line Vent Tube Assembly (WLVTA) Removal and Replacement …
Body Measures: Flight Engineer (FE)-3 Hopkins with operator assistance from FE-6 Nyberg, set up cameras and cabin video, performed body marker instrumentation, and collected calibration and body pose photos and circumference measurements. It is anticipated that body measurements will change due to microgravity and fluid shifts. The goal of this study is to gather preliminary …
Photography of the Juno Spacecraft: Flight Engineer (FE)-5 Parmitano set up a camera in the MRM2 port window for automated photography of the transit of the Juno spacecraft during its closest and final approach to Earth on its way to Jupiter. The Juno spacecraft launched aboard an Atlas V-551 rocket from Cape Canaveral, Florida on …
Investigating the Structure of Paramagnetic Aggregates from Colloidal Emulsions (InSPACE)-3 Experiment: Flight Engineer (FE)-6 Nyberg conducted the last of the planned 42 InSPACE-3 runs for this experiment series. She then conducted the first of new additional series of 12 runs, which will use the same test parameter settings as previous runs but with an increase …
ENERGY (Astronaut’s Energy Requirements for Long-Term Space Flight): Flight Engineer (FE)-5 Parmitano continued his 10 day session of ESA’s ENERGY experiment with this sixth day of activities. He ate a preselected diet, logged all food and drink consumed, and measured his intake and output of liquids and solids. A loss in astronauts’ body mass is …
Ocular Health (OH): Flight Engineer (FE)-3 Hopkins completed a series of activities performed over the last three days in support of the Ocular Health payload, satisfying his flight day 10 session. With FE-5 Parmitano supporting as the Crew Medical Officer, ocular and cardiac ultrasound scans and blood pressure measurements were taken of Hopkins. In-flight data …
