Payloads Fluid Science Laboratory (FSL) Soft Matter Dynamics & Compacted Granulars: The crew exchanged Sample 04 with Sample 01 inside the Soft Matter Dynamics (SMD) Experiment Container in the Lower drawer (CEM Lower) of the FSL. FSL Soft Matter Dynamics – Hydrodynamics of Wet Foams (Foam Coarsening) aims to investigate bubble size and rearrangement dynamics …
SpaceX Demo-2 Launch Delay: SpaceX and NASA scrubbed the launch today due to weather. The next launch attempt is scheduled for 2:22pm CT on Saturday, May 30th from Launch Complex 39A at NASA’s Kennedy Space Center. Payloads The ISS Experience: The crew performed the Z-camera setup in Node 2 in order to capture footage of …
Payloads Advanced Combustion via Microgravity Experiments (ACME): The crew replaced Nitrogen/Oxygen manifold bottles in support of the continuing s-Flames investigation. The ACME experiment series being performed in the Combustion Integrated Rack (CIR) includes five independent studies of gaseous flames. The primary goals of ACME are to improve fuel efficiency and reduce pollutant production in routine …
Payloads H-II Transfer Vehicle (HTV) Wireless LAN Demonstration: The crew performed the XF305 camera setup in order to allow ground teams to monitor the HTV Wireless LAN Demonstration network data from the SSC16 laptop data. HTV Wireless LAN Demonstration (HTV WLAN Demo) demonstrates real-time wireless video transfer between the International Space Station (ISS) and a …
Payloads Astrobee: The crew powered off the Astrobee hardware that was used for the previous day’s Robo-Pro Challenge checkout. Astrobee is made up of three free-flying, cube-shaped robots which are designed to help scientists and engineers develop and test technologies for use in microgravity to assist astronauts with routine chores, and give ground controllers additional …
Payloads Robo-Pro Challenge: The crew performed a checkout out of the Robo-Pro Challenge configuration. The purpose of the checkout was to: 1. Verify Data and voice capability between ISS and participating space centers; 2. Confirm proper target marker locations in the JEM Module using the Astrobee Bumble unit; 3. Allow Bumble to route the expected …
Payloads Astrobee: The crew powered on the Astrobee units for 4hrs to allow ground to perform systems evaluations. Astrobee is made up of three free-flying, cube-shaped robots which are designed to help scientists and engineers develop and test technologies for use in microgravity to assist astronauts with routine chores, and give ground controllers additional eyes …
Payloads Advanced Combustion via Microgravity Experiments (ACME): The crew replaced Nitrogen/Oxygen manifold bottles in support of the continuing s-Flames investigation. The ACME experiment series being performed in the CIR includes five independent studies of gaseous flames. The primary goals of ACME are to improve fuel efficiency and reduce pollutant production in routine fuel combustion activities …
Payloads Materials Science Laboratory- Sample Cartridge Assembly-Gravitational Effects on Distortion in Sintering (MSL SCA-GEDS-German): The crew performed the activities needed to exchange the processed GEDS science sample cartridge assembly (SCA) with a new SCA. Liquid phase sintering is an important means to fabricate net-shape composite materials for applications over a range of industries. The science …
Payloads Cryo Chiller: Following the checkout of the unit earlier this week, the Cryo Chiller was warmed up, the crew removed the sample cartridge insert, and inserted a desiccant pack. Cryo Chiller is a single Expedite the Processing of Experiments to Space Station (EXPRESS) locker replacement unit which provides rapid freezing capability in support of …
