Teams with Exploration Ground Systems successfully lifted the Orion Spacecraft for the Artemis I mission inside the Vehicle Assembly Building on Oct. 20, 2021. Teams attached the spacecraft to one of the five overhead cranes inside the building and began lifting it a little after midnight EDT. Work is underway to fully secure Orion to …
Final stacking operations for NASA’s mega-Moon rocket are underway inside the Vehicle Assembly Building at NASA’s Kennedy Space Center as the Orion spacecraft is lifted onto the Space Launch System (SLS) rocket for the Artemis I mission. Engineers and technicians with Exploration Ground Systems (EGS) and Jacobs attached the spacecraft to one of the five …
Built by teams at ESA (European Space Agency) and aerospace corporation Airbus, the European Service Module for NASA’s Orion spacecraft arrived at NASA’s Kennedy Space Center in Florida on Thursday, Oct. 14, aboard the Russian Antonov aircraft. This service module will be used for Artemis II, the first Artemis mission flying crew aboard Orion. Service …
Leerlo en español aquí. The last piece of Space Launch System (SLS) rocket hardware has been added to the stack at NASA’s Kennedy Space Center in Florida. Crews with NASA’s Exploration Ground Systems and contractor Jacobs added the Orion stage adapter to the top of the rocket inside the spaceport’s Vehicle Assembly Building. To complete the …
Technicians have loaded the last of 10 CubeSats into the Space Launch System (SLS) rocket’s five-foot-tall Orion stage adapter at NASA’s Kennedy Space Center in Florida. After the Orion spacecraft separates from the SLS rocket for a precise trajectory toward the Moon, the shoebox-sized payloads are released from the Orion stage adapter to conduct their …
Engineers with Exploration Ground Systems and contractor Jacobs successfully completed the Umbilical Release and Retract Test on Sept. 19 inside the Vehicle Assembly Building (VAB) at NASA’s Kennedy Space Center in preparation for the Artemis I mission. The umbilicals will provide power, communications, coolant, and fuel to the rocket and the Orion spacecraft while at …
Teams at NASA’s Kennedy Space Center in Florida are putting the final touches on the Orion spacecraft for the Artemis I mission by connecting the ogive fairings for the launch abort system (LAS) assembly. Pronounced oh-jive, the ogive fairings consist of four protective panels, and their installation will complete the LAS assembly. Technicians and engineers …
Two more secondary payloads that will travel to deep space on the Artemis I mission were integrated for launch on July 23, and another is ready for installation at NASA’s Kennedy Space Center in Florida. The satellites – called CubeSats – are roughly the size of a large shoe box and weigh no more than …
Ahead of the Artemis I lunar-bound mission, teams at NASA’s Kennedy Space Center joined the launch abort tower to the Orion spacecraft on July 23. Working inside the spaceport’s Launch Abort System Facility, engineers and technicians with Exploration Ground Systems and primary contractor, Jacobs, lifted the system above the spacecraft and coupled it with the …
Two additional secondary payloads that will travel to deep space on Artemis I, the first flight of the Space Launch System (SLS) rocket and Orion spacecraft, are ready for launch. The Team Miles and EQUilibriUm Lunar-Earth point 6U Spacecraft (EQUULEUS) CubeSats are tucked into dispensers and installed in the Orion stage adapter – the ring …
