Madison Allen
University of Michigan
Optimizing Experiments for Characterizing Pressure Related Facility Effects on High-Power Hall Thruster Testing
Andrew Bennett
University of Michigan
Ionic Salt Cocrystals as Green Propellants
Gilberto Briscoe-Martinez
University of Colorado, Boulder
Enabling Long-term Robot Autonomy through Adaptable Fault Resilience
Kalima Bukenya
University of Massachusetts, Lowell
Multiscale Modeling of 3D Woven Composite Structures Optimized to Minimize Process-Induced Damage
Willie Caraway
University of Illinois at Urbana-Champaign
Computational Investigation of Wave/Mode Structure and Multiplicity in Rotating Detonation Rocket Engines
Sofia Gianina Catalan
University of Texas at Austin
High Frequency Spacecraft State Estimation using Event-based Sensors
Kaylee Champion
University of Colorado, Boulder
Touchless Charge Sensing of Neighboring Spacecraft in Cislunar Space
Eric Chang
Columbia University
Multimodal Tactile Sensing for Intravehicular Robotic Manipulation
Adam Delong
Florida State University
NiTi60 as A Bearing Material in Cryo-Vacuum Conditions
Carl De Vries
Georgia Institute of Technology
Illumination Invariant Terrain Relative Navigation
Miguel Diaz-Lopez
Johns Hopkins University
Thermal effects in plume-surface interaction during a powered descent landing
Ossie Douglas
University of South Florida
Investigation of spin manipulation in phase-engineered monolayer Janus TMDCs for low power device operation in extreme environments
Katelynn Fleming
Rochester Institute of Technology
High Efficiency Laser Power Beaming Receivers for Lunar and Extraterrestrial Exploration
Carl Geiger
Cornell University
Neutral characterization in Electrospray Propulsion Technology Using Novel Experiment (NEPTUNE)
Madeline Haas
Texas A&M University
Modeling of Human Thermoregulation Response to Changes in Gravitational Dose Applied to the Technological Design of EVA Liquid Cooling and Ventilation Garments (LCVG)
Joseph Hernandez-McCloskey
University of Texas at San Antonio
Generative Design of Thermal Management Strategies for In-Space Detonation Propulsion assessed by Laser Absorption Spectroscopy
Elizabeth Juette
University of California, Berkeley
Computational Modeling of Thermionic Energy Conversion for Nuclear Electric Propulsion
Ryan Ketzner
University of Central Florida
Rapid Computational Methods for the Evaluation of Distributed Space Mission Performance
Grant Kirchhoff
University of Colorado, Boulder
Photon-Counting Detector Characterization and Advanced Signal Processing for Space-Based Lidar
Joseph Kirchhoff
University of Texas at Austin
Data-Driven Modeling and Optimization of Robotic In-situ Consolidation of Thermoplastic Composites
Ryan Kowalski
Vanderbilt University
Nano-Optic Probing of Vibrational Modes of Defects and Color Centers in Semiconductors
Noah Lifset
University of Texas at Austin
Computationally Efficient and Scalable Optimization of Low-Thrust, Many-Revolution Trajectories in Multibody Dynamic Environments
Shu-Yu Lin
Massachusetts Institute of Technology
Architectural Design Framework for Providing Passive Behavioral Health Countermeasures
Kian Lopez
University of Colorado, Boulder
Application of a novel distillation reverse osmosis process to reduce mass and improve performance in spacecraft and planetary water recovery systems
Rahil Makadia
University of Illinois at Urbana-Champaign
Keyhole-Based Impact Site Selection and Post-Deflection Impact Risk Assessment for Near-Earth Objects
Rachel Mamich
University of Texas at Austin
Autonomous Rendezvous and Docking with the Aid of Optical Maneuver Detection
Joshua Martin
University of Maryland, College Park
Deep Reinforcement Learning of Multi-Modal Locomotion for Wheel-on-Limb Robotics
Dean Miller
Stanford University
Electrochemical in-situ resource utilization of urine-derived nitrogen for sustainable space travel and habitation
Stefannie Morales Jimenez
Purdue University
Development of High-Performance Green Hypergolic Propellants for Small Spacecraft In-Space Propulsion Systems
Mason Murray-Cooper
Stanford University
Closed-Form Collision Avoidance Maneuvers with Passive Safety Considerations
Robyn Natherson
University of Colorado, Boulder
Robust Optimization of Spacecraft Trajectories using Statistical Thruster Failure Models
Natalia Nigay
Penn State University
Beamed Microwave Energy Propulsion Leveraging Lunar Resources and Dual-Use Infrastructure Systems
Kazue Orikasa
Florida International University
Engineered Hybrid 2D/1D Material Foam – Polymer Composites via Freeze-Drying
Sreevishnu Oruganti
University of Illinois at Urbana-Champaign
Modeling of Intumescent Ablators
Anusha Pai Asnodkar
Ohio State University
Dual-Aperture Fiber Nulling For High Spatial and Spectral Resolution Studies of Exoplanets
Cristyan Quinones-Garcia
North Carolina State University
AlGaN Based Power Electronics and Deep UV Optoelectronics for Remote Sensing Applications in Extreme Temperature Environments
Erick Ramirez
Carnegie Mellon University
Computational Framework for Predicting the Combined Effects of Porosity, Surface Roughness, and Microstructure on the Fatigue Performance of Metal Additively Manufactured Parts
Jens Rataczak
University of Colorado, Boulder
Interdisciplinary Development of Advanced Aerocapture Guidance Algorithms using High-Fidelity Physics Modeling
Tal Schwartz
Stanford University
Towards a robust laser-based velocity and temperature diagnostic for deployment in hypersonic ground-test facilities and high-speed flight
Jonathan Sipps
University of Texas at Austin
Numerical Methods for Distributed Spacecraft Remote Sensing Coverage Analysis
Charles Soulen
University of California, San Diego
Utilizing Surface Acoustic Waves for Rapid Heating in Lithium-Ion Batteries
Jared Termini
University of Iowa
Evaluating the Performance of Cutting-Edge UV Gratings for NASA’s Next Generation Space Telescopes
Zachary Wong
University of California, Los Angeles
Optimization of Oscillating Heat Pipes for Cooling of Space Electronics
Stephanie Woodman
Yale University
Stretchable Shape-sensing Skins: Closing the Loop on Shape Change in Soft Robots
Rui Xu
Columbia University
Analog/Mixed-Signal CMOS Design for Radiation and Extreme Temperature Environments
Riley Yager
University of Alabama, Birmingham
Plasma-photocatalytic conversion of extraterrestrial CO2 using nanofibrous catalytic membrane reactors
Kevin Yu
California Institute of Technology
Novel Hollow Anode Design for Improved Molten Regolith Electrolysis
Duncan Zavanelli
Northwestern University
Grain Boundary Engineering of Thermoelectrics for RTGs
Chloe Zeller
University of Minnesota
Quasicontinuum Fracture Modeling and Development of Amorphous Carbon
