Suggested Searches

2 min read

Curiosity Making Headway West of ‘Dingo Gap’

NASA's Curiosity Mars rover used the Navigation Camera (Navcam) on its mast to catch this look-back eastward at wheel tracks
NASA's Curiosity Mars rover used the Navigation Camera (Navcam) on its mast to catch this look-back eastward at wheel tracks from driving through and past "Dingo Gap" inside Gale Crater.

NASA’s Curiosity Mars rover used the Navigation Camera (Navcam) on its mast to catch this look-back eastward at wheel tracks from driving through and past “Dingo Gap” inside Gale Crater. The gap, spanned by a 3-foot-tall (1-meter-tall) dune, is at the right-hand side of the horizon in this scene. Curiosity crossed the dune on the 535th Martian day, or sol, of the rover’s work on Mars (Feb. 6). On Sol 538 (Feb. 9), it drove 135 feet (41.1 meters) farther westward. This image was taken on Sol 539 (Feb. 10) from the location reached by the previous sol’s drive. For scale, the distance between the parallel wheel tracks is about 9 feet (2.7 meters).

The high-mounted cylinder on the rear part of the vehicle is the rover’s UHF (ultrahigh frequency) antenna. The set of disks mounted below it is part of the calibration target for Curiosity’s Chemistry and Camera (ChemCam) instrument. The ball-on-a-stick device in the foreground is the calibration target, including a sundial, for Curiosity’s Mast Camera (Mastcam). To the right of the UHF antenna in this image are the radiator fins for Curiosity’s power supply, a radioisotope thermoelectric generator.

NASA’s Jet Propulsion Laboratory, a division of the California Institute of Technology, Pasadena, manages the Mars Science Laboratory Project for NASA’s Science Mission Directorate, Washington. JPL designed and built the project’s Curiosity rover.

Image Credit: NASA/JPL-Caltech