A technician calibrates a spectrum analyzer.
NASA WSTF
Our Electrical Calibration service is used to provide measurement capabilities of voltage, current, frequency, resistance, microwave, etc. disciplines. Automated procedures are used to capture as-found/as-left data to report performance.
DC – Low Frequency AC
- Voltage Measurements
Scope:
DC:100 μV to 10 kV
AC: 0.1 to 1000 V at 5 to 50,000 Hz - Resistance Measurements
Scope:
10 mΩ to 1GΩ - Current Measurements
Scope:
DC: 0 to 100 A
AC: 0 to 20 A at 10 to 5000 Hz
- Instrument Types: Multifunction Calibrators, Multimeters, Power Supplies, LCR Meters, Bridges, Oscilloscopes, Standard Resistors, High-Value Resistors, Standard Resistor Shunts, Accelerometers
Radio Frequency/Microwave
- Scope:
Frequency: 0.01 Hz to 26.5 GHz
Phase Modulation: 200 to 20,000 Hz up to 26.5 GHz
Microwave Attenuation: 0 to 120 dB
Automatic Network Analysis: 0.045 Hz to 18 GHz
Instrument Types: Oscilloscope calibrators, spectrum analyzers, time domain reflectometers, counters, network analyzers, signal generator
Vibration frequencies
- Scope:
0 Hz to 20 kHz
Resonant: search to 40 kHz - Instrument Types: Accelerometers