ISS Daily Summary Report – 7/11/2023
Payloads:
BioFabrication Facility (BFF): BFF samples were inserted into the Minus Eighty Degree Laboratory Freezer for ISS (MELFI) in preparation of upcoming operations. Using 3D biological printers to produce usable human organs has long been a dream of scientists and doctors around the globe; however, printing the tiny, complex structures found inside human organs, such as capillary structures, has proven difficult to accomplish in Earth’s gravity environment. To overcome this challenge, Techshot designed their BFF experiment to print organ-like tissues in microgravity, acting as a steppingstone in a long-term plan to manufacture whole human organs in space using refined biological 3D printing techniques.
CIR (Combustion Integrated Rack): The Fluids and Combustion Facility (FCF) Input/Output Processor cable was checked for any anomalies. No anomalies were found and the CIR rack was put back into nominal configuration and the new CIR input/output processor (IOP) was reactivated in an attempt to recover telemetry. The CIR includes an optics bench, combustion chamber, fuel, and oxidizer control, and five different cameras for performing combustion investigations in microgravity.
Dreams: The Dreams hardware was doffed after completing an over-night recording. The hardware battery was recharged and re-donned prior to sleep. The Sleep Monitoring in Space with Dry- Electroencephalogram (EEG) Headband (Dreams) is a technology demonstration investigation that utilizes the Dry-EEG Headband: an effective, affordable, and comfortable solution to monitor astronaut sleep quality during long-duration spaceflight aboard the ISS. Sleep plays a major role in human health and well-being. Insufficient sleep, or sleep disorders can increase the risk of developing medical conditions, such as cardiovascular diseases, and can impair task performance.
JEM Internal Ball Camera 2: The Camera Robot 2 (XF705 camcorder) was installed in the Japanese Experiment Module (JEM). JEM Internal Ball Camera 2 demonstrates technology for automating video and photos of research activities. Crew time is one of the most valuable resources on the ISS, and many simple, repetitive tasks could be automated. This frees up crew time for more important activities.
Systems:
In-Flight Maintenance (IFM) Purge Pump and Separator Assembly (PPSA) Installation: Today, the crew began to clear the Node 3 Deck Rack front in order to remove the current Pressure Control and Pump Assembly (PCPA). This in-flight maintenance operation is the first part of 10 hours of maintenance to be performed as part of the installation of the new Purge Pump and Separator Assembly (PPSA), over the next few days. The PPSA is a Urine Processor Assembly (UPA) upgrade that combines the Pressure Control and Pump Assembly (PCPA), Separator Plumbing Assembly (SPA), and Purge Gas 20 Micron Filter into a single ORU.
Stowage Management: Today, multiple USOS crew worked together to organize and manage stowage, including checking deployed and temporarily stowed items that are in use, disposing of unneeded common trash, and relocating items as needed for the betterment of day-to-day ops on board station.
Completed Task List Activities:
- None
Today’s Ground Activities:
All activities are complete unless otherwise noted.
- Big Fix Patching
- RSVG Router Maintenance (RSVG 3006)
- HRF Rack 1 Rack Power Up Commanding
- HV1 Troubleshooting
Look Ahead Plan
Wednesday, July 12 (GMT 193)
Payloads:
- Actiwatch HRF1 Setup
- Astrobee Battery Swap
- DREAMS Doff/Data Xfer/Stow
- EarthKam Node 2 85mm Lens Change
- JWRS setup part 2
- Story Time in Space-9 Totality Review
Systems:
- IFM Stall Removal/Replace
- IFM PPSA Installation Parts 3 & 4
- IFM Toilet Removal/Replace
- JEM Water Recovery System Cable And Bag Connection
Thursday, July 13 (GMT 194)
Payloads:
- Astrobee Battery Swap
- Bio-Fabrication MELFI Retrieve
- CEO PL Ops
- Genes In Space-10 FF Run1
- HRF Bracket Installs
- J-Camera Robot 2 Act
- Story Time In Space-Totality Demo A, B and Crew Photo
- TELLAS Setup
- Zero-T2 IMTP ops
Systems:
- NG19 Trash Gather
- ESA Stowage Consolidation
- XF705 Safety Video Survey
Friday, July 14 (GMT 195)
Payloads:
- Astrobee Battery Swap
- Bio-Fabrication Cassette Inserts and Ops
- CEO PL Ops
- EarthKAM Shutdown and stow
- J-SSOD-26 Install part 2 & 3
- Surface Avatar USB insert and stow
- TELLAS Insert/Observation/Removal
Systems:
- Stowage Reconfig in Node 1
- SFA Checkout Cable Connection
- WORF Utilization For CEO Targets
Today’s Planned Activities:
All activities are complete unless otherwise noted.
- BFF MERLIN Sample Insertion
- Combustion Integrated Rack I/O Processor Check and Doors Open and Close
- Dreams Dry-EEG Headband setup, charging, and doffing after recording
- Environmental Health System (EHS) Coliform Water Processing
- Environmental Health System (EHS) Potable Water Dispenser (PWD) Sample Collect
- Environmental Health System (EHS) Total Organic Carbon Analyzer (TOCA) Potable Water Dispenser (PWD) Sample Analysis
- Environmental Health System (EHS) Total Organic Carbon Analyzer (TOCA) Sample Data Record
- ER8 Zbook Reset
- Health Maintenance System (HMS) Ultrasound 2 Post Exam
- Ultrasound 2 HRF Rack 1 Power On
- Health Maintenance System (HMS) Ultrasound Exam Setup
- In-Flight Maintenance (IFM) Purge Pump and Separator Assembly (PPSA) Day 1 Closeout
- In-Flight Maintenance (IFM) Purge Pump and Separator Assembly (PPSA) Installation Part 1
- In-Flight Maintenance (IFM) Installation Part 2
- JEM Camera Robot 2 Installation
- Permanent Multipurpose Module 1 Port 4 Audit
- External Recycle Tank Leak Check
- National Conference on Health Communication, Marketing, and Media (NCHCMM) Recorded Message Request
- Stall Door Rail Installation and Removal
- Stowage Management
- Public Affairs Office (PAO) Social Media Event
- Ultrasound 2 Hardware Power Down
- Wanted PMM Audit Items