Circadian Rhythms: Flight Engineer (FE)-6 Gerst removed the Circadian Rhythms hardware to end a 36 hour data take and downloaded the data to the ground for analysis. The main objective of the experiment is to get a better basic understanding of alterations in circadian rhythms in humans during long-term space flights. This data will provide …
Binary Colloidal Alloy Test (BCAT)-Canada 1 (C1) Image Transfer: Commander (CDR) Swanson transferred BCAT-C1 images, set the camera intervalometer and verified the camera was set up to take images of the BCAT-C1 samples. The sample contains a more viscous fluid which requires more mixing on-orbit than previous samples. BCAT-KP provides a platform for material and …
Burning and Suppression of Solids (BASS)-II Operations: Flight Engineer (FE)-6 Gerst conducted flame tests for the BASS-II investigation which examines the burning and extinction characteristics of a wide variety of fuel samples in microgravity. The experiment will guide strategies for materials flammability screening for use in spacecraft as well as provide valuable data on solid …
Burning and Suppression of Solids (BASS)-II Operations: Flight Engineer (FE)-5 Wiseman conducted flame tests for the BASS-II investigation which examines the burning and extinction characteristics of a wide variety of fuel samples in microgravity. Today, Wiseman burned four samples of 2 centimeter wide acrylic slabs. The slabs measured 1, 2, 4, and 5 millimeters thick. …
FLame Extinguishment Experiment (FLEX)-2 Operations: Commander (CDR) Swanson removed the Combustion Integration Rack (CIR) alignment guides which isolated the rack and allowed ground teams to start another FLEX-2 test point via ground commanding. FLEX-2 uses small droplets of fuel to study the special burning characteristics of fire in space. This test session will utilize 50% …
Automated Transfer Vehicle (ATV)-5 Launch: ATV-5 George Lemaitre launched today at 6:47pm CDT from Kourou, French Guiana. Ascent was nominal. Solar array and antenna deployment occurred on schedule. The cargo vehicle is scheduled to dock to the ISS Service Module aft port on August 12. Burning and Suppression of Solids (BASS)-II Operations: Flight Engineer (FE)-6 …
Burning and Suppression of Solids (BASS)-II Operations: Flight Engineer (FE)-6 Gerst conducted flame tests for the BASS-II investigation. The concurrent rods were burned as well as flat nomex fabric sample. The BASS-II investigation examines the burning and extinction characteristics of a wide variety of fuel samples in microgravity. The BASS-II experiment will guide strategies for …
Cardio Ox Ultrasound and Blood Pressure (BP) Operations: With Commander (CDR) Swanson as operator, Flight Engineer (FE)-5 Wiseman collected ultrasound and BP data for the Flight Day (FD) 60 Cardio Ox investigation. The goal of Cardio Ox is to determine whether biological markers of oxidative and inflammatory stress are elevated during and after space flight …
NanoRack Cubesat Deployer-Quad (NRCSD-Q) Installation: Flight Engineer (FE)-6 Gerst installed two sets of NRCSD-Qs on the slide table in the JEM Airlock (JEMAL). The Cubesats were delivered on Orb-2 and will be deployed via the JEM Remote Manipulator System (JEMRMS) at a later time. Clean Bench (CB) Maintenance and Valve Check: Commander (CDR) Swanson cleaned …
Debris Avoidance Maneuver (DAM): Ground teams evaluated tracking data yesterday and throughout the night for a possible conjunction with Object #38925. Due to inconsistent tracking on the object, a 32 second, .5m/sec. Service Module (SM) main engine DAM was performed at 5:56am CDT. To protect 56 Progress (56P) 4-orbit rendezvous today, the DAM was performed …
