The Structural Static Laboratory (SSL) performs tests to verify the structural integrity of space flight and ground test hardware. It can also be used to verify the modes of failure of a design when exposed to simulated service loads.
Facility Overview
The modes of failure include but are not limited to the following: leak before burst, buckling, ultimate failure, yield, or excessive deflection. The test lab is also outfitted with a tensile test machine that can be used to develop mechanical properties, at up to 1,300°F, in metallic coupons, composite coupons, adhesive joints, and weld joints. A high-temperature laser extensometer can be used to give accurate strain data during tensile testing at elevated temperatures.
Quick Facts
Structural testing is performed to verify the structural integrity of spaceflight and ground test hardware. Testing is also performed to verify the finite element analysis by measuring stiffness and induced stress at points in a test article. A structural test can be used to verify the modes of failure of a design when exposed to simulated service loads.
Capabilities
- Structural strength testing
- Stiffness characterization
- Tensile testing
Contact
Structural Static Laboratory
Facility Manager: Ian Haskin
216-433-2119
Ian.M.Haskin@nasa.gov
Facility Manager: Ariel Dimston
216-433-2893
Ariel.E.Dimston@nasa.gov
Using Our Facilities
NASA’s Glenn Research Center in Cleveland provides ground test facilities to industry, government, and academia. If you are considering testing in one of our facilities or would like further information about a specific facility or capability, please let us know.
Gallery
/Hubble%20Space%20Telescope%20(A).png)
