Suggested Searches

5 min read

NASA’s Venus Rover Challenge Winners Announced

This collage shows all 15 finalists for the “Exploring Hell” competition. In all, 572 entries from designers, makers, and citizen scientists were submitted from 82 countries.
Credits: NASA/HeroX

An overwhelming response to the competition will help advance the design of a mechanical rover concept that could one day explore the hellish surface of Venus.

How do you design a vehicle that can withstand the furnace-like heat and crushing pressures of Venus? One idea being explored by NASA’s Jet Propulsion Laboratory in Southern California is a wind-powered clockwork rover, and it’s just been given a boost by designers, the maker community, and citizen scientists from around the world. In February, NASA launched a public competition to seek ideas for a mechanical obstacle-avoidance sensor that could be incorporated into the novel rover’s design. And today, the winners have been announced.

“The response from the community was incredible and better than I ever dreamed,” said Jonathan Sauder, a senior mechatronics engineer at JPL. “There were so many great ideas and well-developed concepts that in addition to first, second, and third place, we decided to add two finalists and another 10 honorable mentions in recognition of the amazing work people put into this project.”

This rendering shows the first-place winning concept “Venus Feelers” by Youssef Ghali from Cairo, Egypt.
Credits: NASA/HeroX/Youssef Ghali

The brilliance of the ideas is matched by the harrowing challenge facing future robotic explorers of Venus. The longest any spacecraft has survived on the surface of Venus is a little over two hours – a record set by the Soviet Union’s Venera 13 probe in 1981. And the last spacecraft to land on Venus was the Soviet Vega 2 mission in 1985. It survived only 52 minutes.

Venus may be known as Earth’s “sister planet,” but to develop machines that can better withstand its harsh environment, we’ll obviously need a different approach.

Enter AREE, a project being led by Sauder at JPL. Short for Automaton Rover for Extreme Environments, AREE is a rover concept with a mechanical locomotion approach capable of performing complex sequences of operations and instructions autonomously. The concept originated as a NASA Innovative Advanced Concepts (NIAC) study, which funds early-stage technologies that may support future space missions.

This 3D model shows the system behind the second-place concept “Skid n’ Bump – All-mechanical, Mostly Passive” by Team Rovetronics, based in California.
Credits: NASA/HeroX/Team Rovetronics

AREE would use a small wind turbine and a system of springs to generate and store mechanical energy that could power its locomotion. Think of how a wind-up pocket watch stores energy and drives the motion of its internal gears to keep the time, and you have a basic idea about how this machine would operate.

By replacing sensitive electronics and delicate computers with gears, components made from advanced heat-resistant alloys, and limited-capability high-temperature electronics, a more robust machine can be built – one that might last for months in the punishing environment.

But how would such a machine navigate the terrain without advanced electronic sensors? That was the question behind NASA’s “Exploring Hell: Avoiding Obstacles on a Clockwork Rover” challenge. In all, 572 entries from a mix of teams and individuals were submitted from 82 countries, with ideas that ranged from systems of rollers to detect hazards to oversized fenders that would snap the rover in reverse should it hit a boulder.

This annotated design shows the system behind the third-place winning concept
This annotated design shows the system behind the third-place winning concept “Direction Biased Obstacle Sensor (DBOS)” by Callum Heron from Brisbane, Australia.
Credits: NASA/HeroX/Callum Heron

The first-place prize is $15,000; second place wins $10,000; and third place, $5,000. The two additional, unplanned finalist prizes for the entry that was the most innovative and the entry with the best prototype are $2,000 each. The grant money was provided by NIAC and NASA Prizes and Challenges programs.

But the biggest prize for the finalists? Being considered for inclusion in AREE’s design as the rover concept continues to develop.

Final Awards

  • First Place: “Venus Feelers” by Youssef Ghali
  • Second Place: “Skid n’ Bump – All-mechanical, Mostly Passive” by Team Rovetronics
  • Third Place: “Direction Biased Obstacle Sensor (DBOS)” by Callum Heron
  • Best Prototype: “AMII Sensor” by KOB ART
  • Most Innovative: “ECHOS: Evaluate Cliffs Holes Objects & Slopes” by Matthew Reynolds

Honorable Mentions

JPL worked with the NASA Tournament Lab to execute the challenge on the HeroX crowdsourcing platform. The NASA Tournament Lab is part of NASA’s Prizes and Challenges program within the agency’s Space Technology Mission Directorate (STMD). The program supports the use of public competitions and crowdsourcing as tools to advance NASA research and development and other mission needs.

For more information about the challenge and the winning entries, including videos and photos of the designs, visit:

https://www.herox.com/VenusRover/128-meet-the-winners

You can also participate in a moderated discussion with Jonathan Sauder and the winners of the “Exploring Hell” Challenge, hosted by HeroX, on July 23 at 10 a.m. PDT (1 p.m. EDT). Register here.

AREE is an early-stage research study funded by NIAC. NIAC is a visionary and far-reaching aerospace program within STMD that has the potential to create breakthrough technologies for possible future space missions; however, such early-stage technology developments may never become actual NASA missions.

Learn more about opportunities to participate in your space program:

www.nasa.gov/solve

Ian J. O’Neill
Jet Propulsion Laboratory, Pasadena, Calif.
818-354-2649
ian.j.oneill@jpl.nasa.gov

Clare Skelly
NASA Headquarters, Washington
202-358-4273
clare.a.skelly@nasa.gov

2020-123