# TEST:  NASA LaRC 14x22 Test 662
# 8% Juncture Flow Model with NACA symmetric wing and horn 
#
#
#   "Z" indicates total pressure deficit is accounted for
#
#                       average   2 * standard deviation
# PTOTZ (psf):            2144.2   16.5
# PSTATUZ (psf):          2095.5   15.4
# MACHUZ:                 0.181    0.002
# QUZ (psf):              48.26    1.35
# RECHORDUZ:            2397651    1747
# VELUZ (ft/s):           203.6     3.5
# TA (deg F):             66.5      7.7
# HEIGHT (in):            65.18     0.07
#
#                                                                   #
# WIND TUNNEL DATA NOT CORRECTED FOR WALL EFFECTS                   #
# WIND TUNNEL DATA DOES NOT INCLUDE FLOW ANGULARITY CORRECTIONS     #
#                                                                   #
# Pressure tap locations:                                           #
#    x,y,z are in millimeters and based on design locations         #
#    z (wing): 1 upper surface, 0 trailing edge, -1 lower surface   #
#                                                                   #
#                                                                   #
#    "999" in Cp location indicates bad pressure data               #
#    for that orifice for that point                                #
#                                                                   #
#                                                                   #
# RUN  POINT  ALPHA   ROLL  HEIGHT  PTOTZ   PSTATUZ  MACHUZ    QUZ   RECHORDUZ  VELUZ      TA    
#  338 2733   7.50  180.08   65.15  2153.73 2104.41  0.1822    48.92  2397018   205.25     70.6  
#  340 2755   7.50  180.09   65.21  2139.35 2091.39  0.1803    47.57  2397288   201.81     63.1  
#  341 2764   7.50  180.09   65.20  2139.48 2090.81  0.1816    48.27  2398648   203.85     65.8  
#                                                                   #
#                                                                   #
#    Note:  87 inches (HEIGHT) is centerline of tunnel              #
#    Note:  inverted 7.5 deg, HEIGHT cannot reach 87 inches            #
#                                                                   #
#                                                                   #
# Date files created by J. Hannon:   02-Jun-2022                    #
#####################################################################
#
