# TEST:  NASA LaRC 14x22 Test 662
# 8% Juncture Flow Model with NACA symmetric wing and horn 
#
#
#   "Z" indicates total pressure deficit is accounted for
#
#                       average   2 * standard deviation
# PTOTZ (psf):            2144.2   16.6
# PSTATUZ (psf):          2095.6   15.3
# MACHUZ:                 0.181    0.002
# QUZ (psf):              48.23    1.53
# RECHORDUZ:            2395991    3060
# VELUZ (ft/s):           203.6     3.9
# TA (deg F):             66.7      7.9
# HEIGHT (in):            53.65     0.10
#
#                                                                   #
# WIND TUNNEL DATA NOT CORRECTED FOR WALL EFFECTS                   #
# WIND TUNNEL DATA DOES NOT INCLUDE FLOW ANGULARITY CORRECTIONS     #
#                                                                   #
# Pressure tap locations:                                           #
#    x,y,z are in millimeters and based on design locations         #
#    z (wing): 1 upper surface, 0 trailing edge, -1 lower surface   #
#                                                                   #
#                                                                   #
#    "999" in Cp location indicates bad pressure data               #
#    for that orifice for that point                                #
#                                                                   #
#                                                                   #
# RUN  POINT  ALPHA   ROLL  HEIGHT  PTOTZ   PSTATUZ  MACHUZ    QUZ   RECHORDUZ  VELUZ      TA    
#  338 2734  10.00  180.10   53.59  2153.77 2104.36  0.1824    49.00  2397286   205.48     70.9  
#  340 2756   9.98  180.11   53.68  2139.35 2091.49  0.1801    47.48  2394303   201.62     63.2  
#  341 2765   9.98  180.11   53.68  2139.45 2090.83  0.1815    48.22  2396385   203.77     65.9  
#                                                                   #
#                                                                   #
#    Note:  87 inches (HEIGHT) is centerline of tunnel              #
#    Note:  inverted 10 deg, HEIGHT cannot reach 87 inches             #
#                                                                   #
#                                                                   #
# Date files created by J. Hannon:   02-Jun-2022                    #
#####################################################################
#
