Follow this link to skip to                                      the main content


Text Size

Melissa Mathews
Headquarters, Washington
(Phone: 202/358-1272)

July 23, 2004
RELEASE : SS04-023
International Space Station Status Report: SS04-023
Expedition 9 Commander Gennady Padalka and Flight Engineer Mike Fincke this week marked their 100th day in orbit, oversaw the undocking of a resupply craft and prepared for their third spacewalk.

A Progress automated resupply craft, the 14th to visit the International Space Station, undocked at 2:05 a.m. EDT today. Fincke filmed its departure, and Station exterior cameras captured rare footage of the Progress' fiery reentry into Earth's atmosphere. The spacecraft had been filled with about a ton of trash and equipment no longer needed aboard the orbiting outpost. It was undocked to clear the area for the upcoming spacewalk and to make room for the next supply vehicle, which is scheduled to launch Aug. 11 and dock with the Station on Aug. 14. The next Progress will include two spare water pumps that engineers hope to use in repairing two U.S. spacesuits with cooling system problems. Engineers are continuing to review detailed photographs downlinked by the crew during last week's troubleshooting.

Throughout the week, Padalka and Fincke prepared for their Aug. 3 spacewalk. Using Russian spacesuits and the Russian Pirs airlock, they will replace several materials exposure experiment packages and a thruster contamination monitor. They also will install reflectors and communications equipment needed for the docking of a new European Space Agency cargo ship, called the Automated Transfer Vehicle, to fly for the first time next year. NASA Television will broadcast the spacewalk live beginning at 2 a.m. EDT Aug. 3. Padalka and Fincke are set to exit the hatch and begin up to six hours of work outside at about 3:10 a.m. EDT.

This will be the 55th spacewalk in support of Space Station assembly and maintenance, the 30th from the Station and the 12th from the Russian airlock. Padalka will be making his fifth spacewalk and Fincke, his third. The Expedition 9 crew, which launched April 19, has a fourth spacewalk scheduled later in the year.

Fincke spent part of his weekend working with the In Space Soldering Investigation. He used a soldering iron to melt solder on 18 experiment samples, documenting differences in the way the solder melted and solidified in weightlessness. Scientists hope to learn how such materials behave in orbit. The tests may help to verify in-flight repair procedures for electronics on the Station and for future space exploration vehicles and outposts.

Thursday, the crew answered questions from teachers gathered for a NASA Explorer School Workshop at the Goddard Space Flight Center in Greenbelt, Md.

For information about NASA and agency missions on the Internet, visit:

Information about crew activities on the Space Station, future launch dates and Station sighting opportunities from Earth, is available on the Internet at:

Details about Station science operations are available on an Internet site administered by the Payload Operations Center at NASA's Marshall Space Flight Center in Huntsville, Ala., at:


- end -

text-only version of this release

NASA press releases and other information are available automatically by sending a blank e-mail message to To unsubscribe from this mailing list, send a blank e-mail message to

Back to NASA Newsroom | Back to NASA Homepage