Text Size
Modular Joints for Soft Robots
December 4, 2014

[image-69]Jeffrey Friesen
University of California, San Diego

We propose to design, optimize, and build several modular soft robotic joints which have between 3 and 6 degrees of freedom (DOF). These designs will be lighter, have faster response times and larger workspaces than current rigid robotic joints, but will still produce comparable actuation forces. We will do this by implementing tensegrity concepts within the designs. The passive compliance that exists within tensegrity structures will allow the joints to enjoy the benefits associated with soft robots, namely the ability to function well in uncertain environments and operate safely alongside humans. The high number of degrees of freedom in each of the modular joints will reduce the number of joints required for high DOF robotic manipulators, which currently use series of single DOF actuators in most applications. Our designs will be focused on modularity so that they can be used in mechanical assemblies to produce lightweight, and powerful soft robots. In order to ensure the joints have large ranges of motion, we will perform an advanced nonlinear optimization of each of the joint's workspace with respect to its topology. NASA Tensegrity Robotics Toolkit, a tensegrity physics simulator developed by IRG, will be used to create physics simulations of the joints and test different controller designs.  Once we are prepared to construct prototypes, Robonaut 2's current arm capabilities will be used as design criterion and therefore the joints will be designed to lift 20 pounds at a distance of 1.8 feet, and be able to achieve maximum end effector speeds of 2 m/s per second at this distance. Then we will build a high DOF manipulator which utilizes several of the joint prototypes within its mechanical structure and evaluate it's performance to demonstrate the effectiveness of the joints.

Image Token: 
Jeffrey Friesen
Jeffrey Friesen
Image Token: 
Image Token: 
Page Last Updated: December 19th, 2014
Page Editor: Loura Hall