STS-114 MCC Status Report #11
Sunday, July 31, 2005 – 3 p.m. CDT|
Mission Control Center, Houston, Texas
The transfer of equipment and supplies from Discovery to the International Space Station and preparations for Monday’s planned spacewalk by Mission Specialists Soichi Noguchi and Steve Robinson were the focus of today's activities in space.
Noguchi, of the Japan Aerospace Exploration Agency, and Robinson, along with remaining Discovery crewmembers, Commander Eileen Collins, Pilot Jim Kelly and Mission Specialists Andy Thomas, Wendy Lawrence and Charlie Camarda, worked on moving items from the Shuttle to the Station. They were helped by International Space Station Commander Sergei Krikalev and NASA ISS Science Officer John Phillips.
Approximately six tons of hardware and equipment, including the 600-pound Control Moment Gyroscope (CMG) that will be installed on the exterior of the Station during Monday’s spacewalk, will be moved from Discovery to the Station. Just over three and a half tons of material, including the replaced CMG, will return to Earth aboard Discovery.
Noguchi, Robinson and Thomas prepared for Monday’s spacewalk by setting up some of the tools they will use to install the new CMG outside the Station. Thomas will once again serve as coach and monitor inside Discovery during the spacewalk. Working from aboard the Station, Kelly and Lawrence will use the Station’s Canadarm2 to maneuver Noguchi between the two spacecraft during the removal and installation of the CMGs. In preparation for that activity, Kelly and Lawrence “walked” the Station arm into position on the Destiny Laboratory. All nine crewmembers also participated in a review of spacewalk activities near the end of their working day.
Collins, Kelly and Camarda talked with reporters from ABC News, Fox News and NBC at about 5:40 a.m. CDT. About 7:25 a.m. Collins, Noguchi, Robinson and Phillips talked with CBS News, CNN and Discovery Channel.
Engineers and mission managers continued to analyze information about Discovery's thermal protection system. They have cleared the orbiter's tiles and a decision was expected later today on the analysis of reinforced carbon-carbon protection for the nose cone and wing leading edges.
Mission managers continue to look at two gap-filler areas. These coated-fiber gap fillers are used to keep hot gas from flowing into gaps in the thermal protection, in these two cases, in tile-protected areas. Two gap fillers are protruding, and teams are working to determine whether any action is required by the crew.
The next STS-114 mission status report will be issued Monday morning, or earlier if events warrant.
- end -
text-only version of this release
NASA press releases and other information are available automatically by sending a blank e-mail message to firstname.lastname@example.org. To unsubscribe from this mailing list, send a blank e-mail message to email@example.com.
Back to NASA Newsroom | Back to NASA Homepage