LOADING...

IceBridge - Instruments: Airborne Topographic Mapper (ATM)

Loading ...

Laser Altimeters - Airborne Topographic Mapper (ATM)

The Airborne Topographic Mapper (ATM)
(NASA P-3B and DC-8)


The Airborne Topographic Mapper (ATM), developed at NASA Wallops Flight Facility in Wallops Island, Va., is a scanning laser altimeter that measures changes in ice surface elevation. It accomplishes this by reflecting lasers off the ice surface and measuring the time it takes light to return to the aircraft, usually flying between 1000 and 2000 feet above the ground. By combining this timing data with detailed information about the aircraft’s position and attitude from GPS and inertial navigation systems, ATM can measure topography to an accuracy of as small as four inches. By flying ATM over the same swath of ground previously covered by ICESat, researchers can maintain a record of changes.

In addition, the precise data from ATM’s navigation system can be fed to pilot displays in the cockpit or even electronically sent to the automatic pilot system, keeping the aircraft aligned with the planned survey track. This keeps the aircraft along the planned ATM survey swath and also benefits the other IceBridge instruments by minimizing aircraft roll and horizontal acceleration.

› More about ATM

 

Example of the data returned from the ATM. › View larger
An example of the data returned by the ATM.

 

Page Last Updated: September 30th, 2013
Page Editor: Holly Zell