Follow this link to skip to                                      the main content

NASA News

Text Size

Michael Braukus
Headquarters, Washington
(Phone: 202/358-1979)

Dewayne Washington/Rani Chohan
Goddard Space Flight Center, Greenbelt, MD
(Phone: 301/286-8955)

April 21, 2003
 
RELEASE : 03-143
 
 
NASA Spins Up New Vehicle Rollover Test
 
 
NASA and the National Highway Traffic Safety Administration (NHTSA) joined forces to, literally, take vehicles out for a spin. The NHTSA wanted to research new methods for testing vehicle rollover resistance, and NASA's High Capacity Centrifuge (HCC) was exactly what was needed to spin up some unique and original vehicle testing.

Vehicles were spun, using the HCC at NASA's Goddard Space Flight Center (GSFC), Greenbelt, Md., on a test platform, until inertia and centrifugal force caused them to tip.

NHTSA employs a consumer rating system, the Static Stability Factor, which uses an engineering formula to determine vehicle rollover rankings. NHTSA wanted to research alternative methods for determining rollover resistance. According to NHTSA's system, a one-star rating means a high likelihood of rolling over, and a five-star rating means a low likelihood.

Officials at NASA and NHTSA expect this first-of-its-kind test will enable them to gain valuable safety information about vehicles that move millions of Americans every day. "The NASA project gives us a chance to really explore the potential of centrifuge testing," said Stephen Kratzke, NHTSA associate administrator for rulemaking. "We were lucky to have a sophisticated facility like Goddard's to perform this valuable research. No one else has such a centrifuge, including the Department of Defense," Kratzke said.

NASA uses the HCC to test spacecraft before they're sent into space. Engineers use the HCC to approximate the effects encountered during the rigors of a rocket launch. By testing hardware on a centrifuge, a satellite's structural integrity can be validated prior to liftoff.

The HCC is a big machine, more than 150 feet in diameter, filling an entire circular building. With two powerful motors running at full tilt, the outer edge of the test arm can reach speeds of more than 200 miles per hour, producing a force 30 times Earth's gravity. It is also a finely tuned machine. At rest, the giant multi-ton arm sits on bearings so smooth just two or three people can push it around the room.

"We can control the centrifuge within a hundredth of an RPM (revolutions per minute)," said Carmine Mattiello, section head of NASA's structural dynamics lab at GSFC. "So we can tell exactly when the wheels are coming off the ground," Mattiello said.

A crash-test dummy went along for the ride in each vehicle. Sitting in the driver's seat, the "passenger" was an important part of the physical test environment. The dummy, similar in shape and weight to a person, increased the realism and accuracy of the test results.

Since its inception, NASA has pursued a commitment to technology transfer to industry, academia and other government agencies. NASA makes technology, as well as facilities and expertise, available to help improve safety, security and quality of life.

For images and information about the rollover tests on the Internet, visit:.

http://www.gsfc.nasa.gov/topstory/2003/0212suv.html

For more information about NASA and technology programs on the Internet, visit:

http://www.nasa.gov

 

- end -


text-only version of this release

NASA press releases and other information are available automatically by sending a blank e-mail message to hqnews-subscribe@mediaservices.nasa.gov. To unsubscribe from this mailing list, send a blank e-mail message to hqnews-unsubscribe@mediaservices.nasa.gov.

Back to NASA Newsroom | Back to NASA Homepage