Rocket Motor Test Helps NASA's Shuttle and Ares I
June Malone/Steve Roy
Marshall Space Flight Center, Huntsville, Ala.
News release: 07-062
PROMONTORY, Utah - NASA's Space Shuttle Program successfully fired a reusable solid rocket motor Thursday, May 24, at a Utah test facility. The two-minute test provided important information for continued shuttle launches and for development of the rocket that will carry the next human spacecraft to the moon.
The static firing of the full-scale, full-duration flight support motor was performed at 1 p.m. MDT at ATK Launch Systems Group, a unit of Alliant Techsystems Inc. in Promontory, Utah, where the shuttle's solid rocket motors are manufactured.
The flight support motor, or FSM-14, burned for approximately 123 seconds, the same time each reusable solid rocket motor burns during an actual space shuttle launch. The Reusable Solid Rocket Booster Project Office at NASA's Marshall Space Flight Center in Huntsville, Ala., manages these tests to qualify any proposed changes to the rocket motor and to determine whether new materials perform as well as those now in use.
"Full-scale static testing such as this is a key element of the 'test before you fly' standard and ensures continued quality and performance," said Jody Singer, manager of the Reusable Solid Rocket Booster Project, part of the Space Shuttle Propulsion Office at Marshall.
Thursday’s test provided data on numerous process, material and design changes planned for shuttle solid rocket motors, including obtaining performance data on a new low-temperature O-ring seal material for improved sealing capabilities and a new nozzle liner material and asbestos-free case insulation material.
The shuttle solid rocket motor firing also supports NASA's future exploration goals to return humans to the moon. The test provided data for development of the first stage solid rocket motor for NASA's Ares I, the launch vehicle that will carry the Orion spacecraft and its astronaut crew to Earth orbit. Engineers with NASA's Exploration Launch Projects Office at Marshall, which manages the Ares launch vehicles, will analyze motor-generated external loads in support of continued Ares I design efforts. They also will review the data gathered on the O-rings and insulation.
Preliminary indications are that all test objectives were met. After final test data are analyzed, results for each objective will be published by NASA in a report available late this year.
The shuttle's reusable solid rocket motor is the largest solid rocket motor ever flown, the only one rated for human flight and the first designed for reuse. Each shuttle launch requires two reusable solid rocket motors to lift the 4.5-million-pound shuttle. The motors provide 80 percent of the thrust during the first two minutes of flight. Each motor, just over 126 feet long and 12 feet in diameter, generates an average thrust of 2.6 million pounds. It is the primary component of the shuttle's twin solid rocket boosters.
During a shuttle launch, the rockets take the shuttle to an altitude of 28 miles at a speed of 3,094 mph before they separate and fall into the ocean. Then they are retrieved, refurbished and prepared for another flight.
Regular static-fire tests of the motors help maintain the highest safety, quality and reliability standards of solid rocket motors used for human spaceflight. Engineers conduct approximately 110,000 quality-control inspections on each motor designed for flight.
For more information about the Space Shuttle Program, visit:
For more information about the Ares 1 launch system, visit: