NASA News

Michael Finneran
757-598-1720 (anywhere number)
michael.p.finneran@nasa.gov
06.09.11
 
RELEASE : 11-046
 
 
Satellite Takes Three-Billionth 'Photo' Marking Fifth Year In Space
 
 
HAMPTON, Va. -- For a satellite that's only five years old, CALIPSO has accomplished a lot. The Earth-observing spacecraft took its three-billionth photo -- actually a "lidar profile" -- on June 2.

June 7 marked the fifth year in space for the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation satellite.

For images, go to: www.nasa.gov/mission_pages/calipso/mission/5years.html

Since its launch April 23, 2006, CALIPSO has traveled 750 million miles, and along the way has generated data that would fill about 10,500 DVDs or 75,000 CDs.

How has it been able to take that many shots? CALIPSO sends out 20 laser pulses every second, and each is only 20 billionths of a second long. That's a lot of profiles observed, "but if you add all the pulses up, the laser has only produced light for one minute," said Chip Trepte, CALIPSO's project scientist, based at NASA's Langley Research Center in Hampton, Va.

"That we are still making measurements after five years is a testimony to the hard work and dedication that the many engineers and scientists gave to make this a reality."


Climate answers

The satellite is providing information to scientists and researchers from over 35 countries. The data are helping answer questions about Earth's warming and cooling patterns as they are affected by clouds and aerosols, which are tiny particles suspended in the air.

"CALIPSO is continuing to provide very valuable information about climate, the weather, and air quality. We now know where the layers of pollution are and how they move over the globe. We didn't know that five years ago," Trepte said.

"Before, we had the ability to look at clouds just like you see on the Weather Channel -- and we didn't know what altitudes they were at, or the numbers of layers they had. After five years of data we really have a very good idea of how these clouds systems look."

The satellite uses lidar -- light detection and ranging -- that is similar to radar but employs light instead of microwave energy. The lidar measures, vertically from space, the thickness and composition of clouds and aerosol layers and their altitudes.

Data from the satellite is helping scientists understand where aerosols block sunlight, and under what conditions high ice clouds warm the atmosphere and lower clouds cool the planet.


The 'A-Train'

CALIPSO is part of the "A-Train," a constellation of five satellites. CloudSat is one of those satellites, and was launched with CALIPSO. It uses a radarradar to profile clouds. Together, CALIPSO, and CloudSat have produced a unique view of clouds that are filling in gaps in our understanding of how clouds affect climate. The two fly in orbital formation with three other Earth-observing satellites.

CALIPSO is collaboration between NASA and the Centre National d'√Čtudes Spatiales¬†(CNES), the space agency of France. Langley is leading the CALIPSO mission and providing overall project management, systems engineering, and payload mission operations.

CNES provides the Proteus spacecraft, a radiometer instrument, and spacecraft mission operations. Hampton University in Hampton, Va., provides scientific contributions. Ball Aerospace developed the lidar and on-board visible camera.

A satellite image of the smoke plume from the Arizona wildfire is available at:

www.nasa.gov/mission_pages/calipso/mission/5years.html

For more information about CALIPSO go to:

www.nasa.gov/calipso
www-calipso.larc.nasa.gov

For more information about Langley go to:

www.nasa.gov/langley



NASA news releases are available automatically by sending an e-mail message to Langley-news-request@lists.nasa.gov with the word "subscribe" in the subject line. You will receive an e-mail asking you to visit a link to confirm the action. To unsubscribe, send an e-mail message to Langley-news-request@lists.nasa.gov with the word "unsubscribe" in the subject line.
 

- end -


text-only version of this release