Kennedy Space Center, Fla.
April 3, 2002
Launch Time Announced For Shuttle Mission STS-110
Launch of Space Shuttle Atlantis on mission STS-110 is set for Thursday, April 4, at the preferred time of about 5:13 p.m. EST from Kennedy Space Center Launch Complex 39B. The countdown, which began April 1 at the T-43 hour mark, continues on schedule.
The planar launch window extends from 5:07:52 - 5:17:50 p.m. EST with the preferred launch time for a flight day three rendezvous beginning at 5:12:51 p.m. The launch window times will be updated to coincide with the latest orbital position of the Space Station and will be announced at the T-9 minute hold.
STS-110 is slated to last 11 days with a planned KSC landing at about 1:21 p.m. on April 15.
This mission marks the thirteenth Shuttle flight to the International Space Station and the second Shuttle mission this year. Mission STS-110 is the 25th flight of the orbiter Atlantis and the 109th flight overall in NASA's Space Shuttle program.
On mission STS-110, the seven-member crew will deliver the S-Zero Truss Segment and the Mobile Transporter to the International Space Station. During the seven days Atlantis will be docked to the Station, four spacewalks will be performed dedicated to truss installation. Work will also begin on the construction of the power and cooling plant that will be needed by future laboratories.
The STS-110 crew includes Commander Michael Bloomfield, Pilot Stephen Frick, and Mission Specialists Jerry Ross, Steven Smith, Ellen Ochoa, Lee Morin, and Rex Walheim. (end of general release) REMAINING COUNTDOWN MILESTONES
*all times are Eastern Launch-1 Day (Wednesday, April 3) (As of 5 p.m., the countdown clock is in a scheduled built-in hold at the T-11 hour mark)
Flight crew equipment late stow (5:50 p.m.)
Move Rotating Service Structure (RSS) to the park position (9:30 p.m.)
Perform ascent switch list
Fuel cell flow-through purge complete Launch Day (Thursday, April 4) Resume countdown at T-11 hours
Activate the orbiter's fuel cells (2:32 a.m.)
Clear the blast danger area of all non-essential personnel
Switch Atlantis' purge air to gaseous nitrogen (3:02 a.m.) Enter planned 2-hour built-in hold at the T-6 hour mark
Launch team verifies no violations of launch commit criteria prior to cryogenic loading of the external tank
Clear pad of all personnel
Chilldown of propellant transfer lines (7:47 a.m.)
Begin loading the external tank with about 500,000 gallons of cryogenic propellants (about 8:17 a.m.) Resume countdown
Complete filling the external tank with its flight load of liquid hydrogen and liquid oxygen propellants (about 11:17 a.m.)
Final Inspection Team proceed to launch pad Enter planned 2-hour built-in hold at T-3 hours
Perform inertial measurement unit preflight calibration
Align Merritt Island Launch Area (MILA) tracking antennas
Perform open loop test with Eastern Range Resume countdown at T-3 hours
Complete close-out preparations in the white room
Check cockpit switch configurations
Begin Eastern Range final network open loop command checks
Primary ascent guidance data is transferred to the backup flight system Enter planned 10-minute hold at T-20 minutes
NASA Test Director conducts final launch team briefings
Complete inertial measurement unit preflight alignments Resume countdown at T-20 minutes
Transition the orbiter's onboard computers to launch configuration
Start fuel cell thermal conditioning
Close orbiter cabin vent valves
Transition backup flight system to launch configuration Enter estimated 45-minute hold at T-9 minutes
Launch Director, Mission Management Team and NASA Test Director conduct final polls for go/no go to launch Resume countdown at T-9 minutes
(about 5:04 p.m.)
Start automatic ground launch sequencer (T-9:00 minutes)
Retract orbiter crew access arm (T-7:30)
Start mission recorders (T-6:15)
Start Auxiliary Power Units (T-5:00)
Arm SRB and ET range safety safe and arm devices (T-5:00)
Start liquid oxygen drainback (T-4:55)
Start orbiter aerosurface profile test (T-3:55)
Start main engine gimbal profile test (T-3:30)
Pressurize liquid oxygen tank (T-2:55)
Begin retraction of the gaseous oxygen vent arm (T-2:55)
Fuel cells to internal reactants (T-2:35)
Pressurize liquid hydrogen tank (T-1:57)
Deactivate SRB joint heaters (T-1:00)
Orbiter transfers from ground to internal power (T-0:50 seconds)
Ground Launch Sequencer go for auto sequence start (T-0:31 seconds)
SRB gimbal profile (T-0:21 seconds)
Ignition of three Space Shuttle main engines (T-6.6 seconds)
SRB ignition and liftoff (T-0) SUMMARY OF BUILT-IN HOLDS FOR STS-110
T-TIME - LENGTH OF HOLD - HOLD BEGINS - HOLD ENDS
T-11 hours - - - 1:17 a.m. Thurs.
T-6 hours - 2 hours - 6:17 a.m. Thurs. - 8:17 a.m. Thurs.
T-3 hours - 2 hours - 11:17 a.m. Thurs. - 1:17 p.m. Thurs.
T-20 minutes - 10 minutes - 3:57 p.m. Thurs. - 4:07 p.m. Thurs.
T-9 minutes - about 45 minutes - 4:18 p.m. Thurs. - 5:04 p.m. Thurs. CREW FOR MISSION STS-110
Commander (CDR): Michael Bloomfield
Pilot (PLT): Stephen Frick
Mission Specialist (MS1): Rex Walheim
Mission Specialist (MS2): Ellen Ochoa
Mission Specialist (MS3): Lee Morin
Mission Specialist (MS4): Jerry Ross
Mission Specialist (MS5): Steven Smith
- end -
text-only version of this release
To receive status reports and news releases issued from the Kennedy Space Center Newsroom electronically, send a blank e-mail
message to email@example.com. To unsubscribe, send
a blank e-mail message to firstname.lastname@example.org.
The system will confirm your request via e-mail.