NASA News

Lori J. Rachul
Glenn Research Center
216-433-8806
lori.j.rachul@nasa.gov

Ashley Edwards/Grey Hautaluoma
Headquarters, Washington
202-358-1756/0668
ashley.edwards-1@nasa.gov
grey.hautaluoma-1@nasa.gov

Amber Philman
Kennedy Space Center, Fla.
321-867-2468
amber.n.philman@nasa.gov

August 17, 2009
 
RELEASE : 09-038
 
 
NASA Completes Assembly of Ares I-X Test Rocket
 
 
CAPE CANAVERAL, Fla. -- For the first time in more than a quarter-century a new space vehicle stands ready in NASA's Kennedy Space Center Vehicle Assembly Building. The Ares I-X rocket, its simulated crew module and launch abort system are assembled on a mobile launch platform at Kennedy in preparation for launch this fall.

The final segments of the Ares I-X were stacked on Aug. 13, completing the 327-foot launch vehicle and providing the first look at the finished rocket's distinctive shape. The Ares I-X flight test is targeted for Oct. 31.

"More than three years of hard work with the NASA and contractor team has brought us to this historic moment," said Bob Ess, Ares I-X mission manager. "This flight test is a critical step in continuing our design process for the Ares vehicle and the first flight for the Constellation Program."

The upper stage simulator of the Ares I-X consists of 11 individual components that were designed and manufactured during a two-year period at NASA's Glenn Research Center in Cleveland. The components represent the size, outer shape and weight of the second stage of the Ares I rocket. Glenn utilized its in-house work force and on-site facilities, with assistance of some highly skilled welders from the local Cleveland industry, to manufacture the components. Steel sheets were rolled and welded into cylinders, painted and outfitted with an internal access system, electronic sensors and cabling.

The Ares I-X is wired with more than 700 sensors to gather data during the two-and-a-half minute flight test. The launch will provide NASA an early opportunity to test and prove hardware, facilities and ground operations associated with the Ares I crew launch vehicle. The data collected during the launch will allow NASA to gather critical data during ascent of the integrated Orion spacecraft and the Ares I rocket.

Now that the Ares I-X is assembled, numerous evaluations will be run on all the rocket systems, including complex instruments that will constantly measure the vehicle's movements as it launches and the first stage separates. The evaluations include a process called "modal testing," which will shake the stack slightly to test stiffness of the rocket, including the pinned and bolted joints.

Video B-roll of the Ares I-X will be available on NASA Television's Video File feed. For NASA TV streaming video, schedules and downlink information, visit:

http://www.nasa.gov/ntv


To follow Ares I-X processing on Twitter, visit:

http://twitter.com/NASA_Ares_I_X


For more information about the Ares I-X and NASA's next-generation spacecraft, visit:

http://www.nasa.gov/ares


 

- end -


text-only version of this release

NASA Glenn Research Center news releases are available automatically by sending an Internet electronic mail message to:
    grc-subscribe@newsletters.nasa.gov
Leave the subject and body blank. The system will reply with a confirmation via e-mail of each subscription. You must reply to that message to begin your subscription.
To unsubscribe, address an e-mail message to:
     grc- unsubscribe@newsletters.nasa.gov
Leave the subject and body blank.